Monday, August 11, 2014

Five Ways to Prevent Mold from Invading a Home


August 11, 2014
http://blog.friedrich.com/five-ways-to-prevent-mold-from-invading-a-home/

You may not realize this, but mold is actually a naturally occurring part of nature. If you take a walk in the woods, you will probably see some mold acting as the forest’s recycling system. However, since you probably don’t live in the woods, odds are you don’t want mold in your home either. Here are five ways to prevent mold from infiltrating your home.
Source: Wikimedia Commons
old home Address and fix leaky plumbing – Make repairs to leaky plumbing quickly, especially under toilets and cabinets and in the basement where water can collect out of sight. Also check for damp pipes where condensation is collecting. Wipe these dry whenever you find them and then find proper insulating materials to prevent a recurrence of condensation.
Quickly clean up spilled water – After a spill or a water leak, get water wiped up immediately. If rugs or carpets are involved, make sure that they are given plenty of opportunity to dry before being put back in place. Although not technically a “spill,” it will also help to wipe the shower dry after each use.
Keep an eye on your drip pans – Some of our modern conveniences are an unknown source of pooling water. Make sure that drip pans and drain lines from AC units, refrigerators and ice machines are unobstructed and free-flowing so that water isn’t allowed to collect or pool.
Utilize your exhaust fans – Humidity often builds up in the bathroom, kitchen and laundry room.  Make sure that each of these rooms has proper exterior venting, an exhaust fan to the outside, or a window. Sources of humidity:
  • –Cooking/Boiling Water
  • –Automatic Dishwashers
  • –Showers/Baths
  • –Drying Clothes
Purchase a reliable dehumidifier – The indoor humidity needs to be kept low to prevent mold growth, if possible between 30 and 50 percent. The right dehumidifier – like Friedrich’s Energy Star-designated D50BP with built in drain pump – can pull up to 50 pints of moisture from your home’s air every 24 hours. It can handle damp to extremely damp circumstances, uses regular house current and comes with a 6-foot power cord.

Monday, August 4, 2014

Touting the Benefits of Residential Geothermal HVAC Systems

Industry Groups Educate Homeowners About GHPs


July 28, 2014
Advocates for geothermal technology have been working hard to advance and promote the adoption of geothermal heat pumps (GHPs) across the country. As a result, more homeowners are learning about the energy savings that can be achieved through the use of GHPs and choosing to install these systems in their new or existing houses.
That being said, the industry still has a long way to go before GHPs will be considered mainstream technology, as market penetration is still in the low single digits. But, optimism remains high that the federal government will extend existing tax credits beyond 2016, and local utilities and state governments will start (or continue) offering incentives to encourage homeowners to invest in GHPs.

Surviving and Thriving

The good news about the residential geothermal market is that it survived the recession, and no major manufacturer went out of business, said Doug Dougherty, president and CEO, GeoExchange Organization (GEO), a nonprofit trade group that advocates the economic, energy security, and environmental benefits of GHPs. “We had about 2-3 percent of the residential new home market going into the recession, and coming out, we’re about the same — although it took a while to get back to that point, given the lack of new homes being constructed.”
There was even optimism last year that market share could reach 4-5 percent in 2014, as installations of GHPs were robust in the third and fourth quarters of 2013. Then came the first quarter of 2014, with the worst winter in years, causing new home sales to grind to a halt.
“We had a very poor first quarter, and a lot of our units didn’t go in because nothing was being constructed,” said Dougherty. “However, I have talked with some of our larger driller members about how many jobs they lost as a result of the weather, and all of them said the jobs were just postponed, not canceled. Everything ground to a halt because they couldn’t get their drilling rigs in. We believe there is going to be some catch up this spring and summer, and the second and third quarters of this year are going to be very good.”

Driving Interest

One major issue currently driving interest in GHPs is the desire of some homeowners to move away from heating equipment utilizing fossil fuels. “This was highlighted by the harsh winter, which resulted in high costs and/or propane shortages,” said Patrick Hughes, director, Buildings Program and Building Technologies Research & Integration Center (BTRIC), Oak Ridge National Laboratory (ORNL), which facilitates scientific discoveries and technical breakthroughs that accelerate the development and deployment of solutions in building energy efficiency.
In fact, the desire to move away from propane is expected to be a major driver in the GHP retrofit market this year, as those sky-high bills from last winter are still on the minds of many homeowners. Some in the geothermal industry are advertising aggressively to these homeowners, coining the term “pro-pain,” in order to encourage them to switch to GHPs.
Propane users should seriously consider switching to a GHP because the shortage of propane and the resulting price hikes will occur again, with more frequency, said Dougherty. “The price volatility of propane is going to be out there because of the demand for natural gas. Propane is a derivative of natural gas. As coal-fired plants come under more regulation, we’re going to see more natural gas used to generate electricity. That’s going to drive up the cost of propane again, so we think the retrofit market for propane furnaces is pretty ripe for us and that we’re going to see a lot of retrofits before next winter.”

Death and Taxes

The federal tax credits are also driving the market, along with the states, utilities, and cooperatives offering incentives for geothermal installations, said Bob Ingersoll, director, International Ground Source Heat Pump Association (IGSHPA), a nonprofit organization that advances GHP technology on local, state, national, and international levels. “With the interest from local energy providers, homeowners are inquiring about incentives for installing these energy-efficient systems, which have shown a payback period of five to seven years.”
These incentives are still necessary, as the high first cost is the primary barrier to GHPs becoming more mainstream, said Hughes. “Also, in many geographic areas, the installation and after-sales service infrastructure is weak or lacking. In these areas, it is not easy to source a system, and one-off pricing can make it difficult for even a motivated customer to justify the high cost.”
That is why GEO is working diligently to make sure the federal tax credits are extended, as well as introducing legislation to include GHPs in the federal definition of clean energy. “If we can change the federal definition, we can use that to help us change states’ definitions, creating a new path for utilities to earn renewable credits with GHPs,” said Dougherty.
The incentives for utilities are significant, noted Ingersoll, as geothermal units reduce the peak load on their grids. “Research has shown that every ton of installed GHP results in more than 0.5 kW in demand reduction. The industry needs to help bring awareness about the technology by reaching out to state and central agencies’ decision makers regarding tax incentives.”
Some utilities are embracing GHPs, such as Western Farmers Electric Cooperative, Anadarko, Oklahoma, which is spearheading a unique program to help bring awareness about GHPs in Oklahoma and parts of New Mexico, Kansas, and Texas, said Ingersoll. “The GoGoGeo Challengehas a goal of showing 25,000 homeowners the potential savings that can be achieved through the use of a ground-source heat pump. We are looking to help expand programs like the GoGoGeo Challenge to include other entities where we can group retrofits and promote thermal service agreements to help alleviate the first-cost issue of ground-source heat pumps.”
But, overall, utilities continue to underestimate the value of GHPs, said Dougherty, and if they fail to recognize its benefits, others will step in and take away that opportunity from them. “There are progressive developers out there right now who have figured out they can make money off the geothermal exchange in the ground. In one new subdivision, the developer is installing a common loop field and GHPs for 7,500 homes and then charging the homeowners a monthly tariff for energy service. That type of arrangement is really going to move the market.”
That being said, the barriers to the widespread adoption of GHPs remain the same as they have for the last 30 years, said Dougherty.
“Lack of consumer awareness, lack of builder adoption, and lack of utility support. Although we have a much better infrastructure of distributors and dealers, we still don’t have a level of business infrastructure to promote the technology. But, I am an eternal optimist, and I believe the higher cost of energy will move people toward GHPs. In the retrofit and new home construction markets, we’re going to see a fairly significant increase in market penetration over the next three to five years.”
Publication date: 7/28/2014

Monday, July 28, 2014

Bye, Bye R-507A, R-404A and Others; EPA to Ban More 'Unacceptable' Refrigerants

 Contracting Business   July 16, 2014
http://contractingbusiness.com/refrigeration/bye-bye-r-507a-r-404a-and-others-epa-ban-more-unacceptable-refrigerants 

The list of refrigerants that refrigeration contractors have known as popular, efficient, and "forgiving," but that are now branded as "unacceptable" by the U.S. Environmental Protection Agency grew by leaps and bounds on July 10, when EPA proposed to prohibit the use of certain chemicals that it says significantly contribute to climate change where what it describes as "safer, more climate-friendly alternatives" exist.
This is the agency’s second action aimed at reducing emissions of hydrofluorocarbons (HFCs), a class of "potent greenhouse gases," under President Obama's Climate Action Plan.

EPA says it estimates the ban will reduce greenhouse gases by up to 42 million metric tons of carbon dioxide equivalent by 2020, equal to the carbon dioxide emissions from the annual electricity use of more than five million homes.

“President Obama called on us to take action against potent greenhouse gases that contribute to climate change. Today, we are issuing a new proposal that builds on the innovative work businesses across the country have already made to reduce and replace some of the most harmful chemicals with safer, more climate-friendly alternatives that are available and on the market today,” said EPA Administrator Gina McCarthy. “This action will not only result in significant reductions of harmful greenhouse gases, but it will also encourage businesses to continue bringing safer alternatives to market.”

Under the authority of the Clean Air Act, EPA’s Significant New Alternatives Policy (SNAP) Program evaluates substitute chemicals and technologies that are safe for the ozone layer. The proposed action would change the status of certain so-called "high-global warming potential (GWP) HFCs" that were previously listed as acceptable under the SNAP Program to be unacceptable in specific end-uses based on information showing that other alternatives are available for the same uses that pose lower risk overall to human health or the climate.

CLICK HERE FOR THE ENTIRE LIST OF NEW UNACCEPTABLE REFRIGERANTS.
The HFCs and HFC-containing blends affected by today’s proposal are used in aerosols, motor vehicle air conditioning, retail food refrigeration and vending machines, and foam blowing.

Today’s proposal complements an earlier action EPA proposed to expand the list of climate-friendly alternatives for refrigeration and air conditioning under its SNAP Program.

The agency received input from industry, environmental groups and others through workshops and meetings over the past year on this proposal.

EPA will accept comment on the proposal for 60 days after publication in the Federal Register.
In addition to more than a dozen automotive refrigerants and aerosol propellants, the new list includes:
  • For new and retrofit retail food refrigeration (including stand-alone equipment, condensing units, direct supermarket systems, and indirect supermarket systems) and for new and retrofit vending machines, as of January 1, 2016: the HFC blends R-507A and R-404A are unacceptable.
  • For new and retrofit retail food refrigeration (including direct supermarket systems and indirect supermarket systems), as of January 1, 2016: HFC-227ea, R-407B, R-421B, R-422A, R-422C, R-422D, R-428A, and R-434A are unacceptable.
  • For new, stand-alone retail food refrigeration and new vending machines, as of January 1, 2016: HFC-134a and certain other HFC refrigerant blends are unacceptable.
  • For all foam blowing end-uses, as of January 1, 2017, except where allowed under a narrowed use limit: HFC-134a and blends thereof are unacceptable; HFC-143a, HFC-245fa and HFC-365mfc and blends thereof, and the HFC blends Formacel B, and Formacel Z-6 are unacceptable in all foam blowing end-uses where they are currently listed as acceptable, except for spray foam applications; and the HFC blend Formacel TI is unacceptable in all foam blowing end-uses where it is currently listed as acceptable.

CLICK HERE FOR THE ENTIRE LIST OF NEW UNACCEPTABLE REFRIGERANTS. 

Monday, July 21, 2014

DATCP Offers Buying Tips for Propane
July 17, 2014
http://datcp.wi.gov/news/?ID=1123



Media Contact: Jerad Albracht, Senior Communications Specialist, 608-224-5007 or Jim Dick, Communications Director, 608-224-5020

MADISON – With summer in full swing, winter heating options are the last thing on the mind of most consumers. But energy experts are advising consumers to plan ahead for their propane needs this winter by looking at options now and buying early. To assist Wisconsin consumers, DATCP is offering a new fact sheet explaining propane options, including questions to ask when comparing offers.
“Propane suppliers offer a wide variety of pricing agreements and delivery options, and consumers are more likely to get a better price when they buy early,” said Sandy Chalmers, Administrator of Trade and Consumer Protection. “Research options, ask questions, and get everything in writing.”
The new DATCP fact sheet includes background on common delivery options and pricing structures to help consumers weigh their options when buying propane. It also includes key questions for the consumer to ask, aimed at allowing the consumer to compare contracts. Download the fact sheet from the DATCP website (http://datcp.wi.gov/uploads/Consumer/pdf/PropaneConsumerTips500.pdf) or request a copy by mail by calling 1-800-422-7128.
“The propane contract sets the terms of the agreement between a propane marketer and a consumer, so make sure you read and understand the terms of the contract before you sign,” said Chalmers. “Pay special attention to provisions on added fees and surcharges and how credits and refunds will be applied.”
Other tips to consider include:
Pricing agreements. Budget plans, pre-pay plans, and fixed-price plans can offer consumers savings when compared to buying at market price. Knowing your tank size and your typical propane usage can help you get the best price and avoid over- or under-buying. If you use up your contracted amount before the end of the season, you may have to pay the market price for additional propane. If you overbuy, your retail marketer may credit your account for the following year, depending on the terms of your contract.
Delivery arrangements. Some retail marketers offer to deliver propane automatically to refill your tank. Others allow you to monitor your usage and call when you need a delivery. Make sure you know how much advance time your retail marketer needs to schedule a delivery.
Ask about fees and other charges. When you compare between retail marketers, don’t ask only about per-gallon cost. Retail marketers may charge a variety of add-on fees, including trip fees, after-hours delivery charges, weekend fees, partial fills and inspection fees. Those fees can have a major impact on your total out-of-pocket costs.
Get a signed and dated contract and keep copies of receipts for at least a year. No matter what kind of agreement you reach, a written contract sets out the rights and responsibilities of both the buyer and seller. Receipts are handy to have if there is a dispute between you and your propane supplier.
For additional information or to file a complaint, visit the Consumer Protection Bureau at datcp.wisconsin.gov, call the Consumer Information Hotline at 1-800-422-7128 or send an e-mail to datcphotline@wisconsin.gov.

Link to .PDF version of full news release:  07.17.14_DATCPPropaneBuyingTips.pdf 

Monday, July 14, 2014

Ice Storage: A Cost-Efficient Way To Cool Commercial Buildings While Optimizing the Power Grid

When CALMAC CEO Mark MacCracken looks at a building, he sees thermal mass and air conditioning load, and – above all – an opportunity to vastly increase the efficiency of our national power grid. He sees the world of electricity production and consumption from an integrated, systems-thinking approach, and the potential for huge improvements.  Which is a blessing and a curse, because alongside the enormous potential, he also observes an impressively high level of old-school, status quo thinking that keeps us mired in uneconomical ways of running our power grid and cooling our buildings.

Wednesday, July 9, 2014

Duct Dynasty: Duct Sealing Side Effects You Need to Know

Take Caution When Sealing Up Undersized or Oversized Equipment

http://www.achrnews.com/articles/127038-duct-sealing-side-effects-you-need-to-know


In many areas of the country, duct sealing and tightness testing is now mandated at local and state levels. This has brought about renewed interest in sealing existing duct systems among HVAC professionals as awareness increases.
While a properly sealed duct system can lead to improved IAQ, comfort, and possibly a reduced risk of carbon monoxide poisoning, is it possible that too much is being assumed for tight ducts to really be right ducts? Is there a possibility that duct sealing could negatively affect an HVAC system?

Cause and Effect

Monday, June 30, 2014

A Brief History of Air Conditioning

Inventors who came before Willis Haviland Carrier tinkered with cooling machines. But it was Carrier's creation that launched the modern idea of air conditioning. To mark the 110th anniversary of his invention, we look back at the long story of a/c.

By Amanda Green  July 16, 2012 3:00 PM


1758 All liquid evaporation has a cooling effect. Benjamin "I invented everything" Franklin and Cambridge University professor John Hadley discover that evaporation of alcohol and other volatile liquids, which evaporate faster than water, can cool down an object enough to freeze water.